Views: 1425

DRINKING WATER & FOODSTUFF

Product code : 02.04

0
Quantity:

    Ceramic Polymer Coatings for food and drinking water applications

     
    Approved coating systems feature essential certitude
     

    In our versatile product range we provide approved coating systems for the field of drinking water, swimming pool water and foodstuff(German Standard approvals, European acceptance). We invest continuously in specific test series to guarantee the high quality and safety of our products for these scopes of application.

     

    Our approved coating systems feature the same advantages as our products for internal tank coating in the field of waste water and oil industry. Chemical resistance and thermal stability are relevant as well as high adhesion and abrasion resistance. These physical properties are performed by all Ceramic Polymer products comparably.

     
    Our 1-material-concept signifies essential advantages in comparison to conventional multi-layered systems with anodic acting primers, which dissolve relatively quickly in case of damage and lead to failure of these systems (e.g. zinc-primer = sacrificial anode). These effects are avoided by using our coating systems, because they are applied directly on the substrate which is to be protected.
     
     
     
     
    Ceramic Polymer: Internal and external coating of drinking water filters Ceramic Polymer: Internal coating of aqua globe Ceramic Polymer: Coating of anaconda basin at a German zoo Ceramic Polymer: Coating for swimming pool
    Ceramic Polymer: Internal coating of swimming pool filters Ceramic Polymer: Coating of fish pond for exotic fishes
     
     
     
     
    The necessary criteria of the German Federal Health Office are fulfilled in different groups. Thus, our products are usable in scope of drinking water (German standard KTW). They show for instance hardly verifiable chlorine absorption or release of substances, which would promote microbiological growth and impair the drinking water.
     
    In other, month-long test series according to DVGW-W270, no abnormally microbial slime formation occurred on the coated surface. Hence, our certified products are applicable as internal coating for drinking water tanks and pipework, also in microbiological regards.
     
    Our coating systems display safety for drinking water even at high operating temperatures up to 85°C, which is attested by extensive analysis of independent institutes.
     
    For foodstuffs of neutral, acidic and alcoholic kind, our coating systems are continuously tested and approved in accordance with physical-chemical and microbiological assessments. None impermissible emissions of substances from the coating; smell, taste and quality of the storage fluids (hydrous, light and concentrated alcohol as well as acidic liquids) are not affected.
     
    The coating for different kinds of pools has to meet the guidelines for swimming and bathing pool water (German standard KSW). Our product systems are tested on migration behavior to chlorine for cold and warm pool water as well as very warm whirl pool water up to 40°C. Hardly verifiable chlorine absorption or release of oxidable substances occurred. The consistency of the swimming pool water is not impaired.
     
     
     
     
    Tests & Certificates of independent institutes
     
    - German standards - drinking water approval
    - DVGW-W270, growth of micro-organisms (bio film)
    - German standards - foodstuff approval, microbiological and physical-chemical analysis
    - German standards - swimming water approval (open air, indoor, warm whirl-pool)
    - Drinking Water installations on- and offshore - Folkehelse, Norwegian Institute of Public Health, Oslo